| |
| Fiber Port - Multimode |
| Fiber Type |
- 50/125um, 62.5/125um ; FC connector |
| Maximum transmission distance |
- 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km) Wave Length: 820nm |
| Transmitting power |
- -12dBm (Min) ~ -9dBm (Max) |
| Receiver sensitivity |
- -28dBm (Min) |
| Link budget |
- 16dBm |
| Fiber Port - Singlemode |
| Fiber Type |
- 9/125um ; FC connector |
| Maximum transmission distance |
- 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km) |
| Wavelength |
- 1310nm |
| Transmitting power |
- -9dBm (Min) ~ -8dBm (Max) |
| Receiver sensitivity |
- -27dBm (Min) |
| Link budget |
- 18dBm |
| Ethernet Interface |
| Connector Type |
- 1*RJ45, supports Auto-MDI-X |
| Interface Rate |
- 10/100 Mbps, half/full duplex auto-negotiation |
| Interface Standard |
- Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) |
| MAC Address Tabele Size |
- 4096 |
| FXS Phone Interface |
| Connector Type |
- 32*RJ11, 2-3 is the pair which is used for telephone |
| Ring Voltage |
- 75V |
| Ring Frequency |
- 25Hz |
| Two-line impedance |
- 600 Ohm (pick up) |
| Return Loss |
- 40dB |
| FXO Switch Interface |
| Connector Type |
- 32*RJ11, 2-3 is the pair which is used for telephone |
| Ring Detect voltage |
- 35V |
| Ring Detection Frequency |
- 17Hz - 60Hz |
| Two-line impedance |
- 600 Ohm (pick up) |
| Return Loss |
- 40dB |
| Environmental |
| Power Supply |
- 12VDC 1A (external) |
| Power Comsumption |
- ≤5W |
| Dimensions |
- 50 X 180 X 320mm (H X W X L) |
| Working Temperature |
- 0°C ~ 50°C |
|
|
