Home > Products > Device Severs > CLR-MOD-E100
           
 
  CLR-MOD-E100
   
  Modbus RS232/RS485/422 RTU/ASCII to
  Modbus TCP/IP Gateway
 
              
             
  Specifications  
             
   System Information  
 
 Modes - Modbus_RTU_Master
- Modbus_RTU_Slave
- Modbus_ASCII_Master
- Modbus_ASCII_Slave
   
 Ethernet
 Port Number - 1
 Interface Standard - 8 pin RJ45
 Rate - 10/100 Mbps, MDI/MDIX, cross and straight connection
 IP Address allocation modes - Static IP and IP from DHCP server
 Protection - 2KV electromagnetic isolation, shell insulation blocking
 Network Protocol - IPV4, TCP/UDP
   
 Serial
 Port Number - 1
 Port connection type - DB9 connector
 Interface Standards - RS-232, RS-485 & RS422
 DB9 PIN Definition - RS232 --> 2 (RXD), 3 (TXD), 7 (RTS), 8 (CTS)
- RS422 --> 2 (RX+), 3 (TX+), 5 (GND), 7 (TX+), 8 (RX+)
- RS485 --> 3 (B-), 7 (A+)
 Data bits - 5, 6, 7, 8
 Stop bit - 1 ~ 2
 Parity - None, Even, Odd, Space, Mark
 Baud Rate - 600 ~ 230400bps
 Flow control - None: No flow control.
- HardWare: Hardware flow control(RTS/CTS).
- Xon/Xoff: Software flow control
   
 Basic Parameters
 Dimensions - 86 * 81 * 24mm (L * W * H)
 Operating Temperature - -40 ~ 80°C
 Storage Temperature - -40 ~ 85°C, 5 ~ 95% RH (no condensation)
 Input voltage - DC 5 ~ 36V
 Working current - 95mA @ 5V
 Power Consumption - <1W