Home > Products > Industrial POE Products > CLR-IES-L210P
  8*10/100Base-TX POE + 2*SFP/RJ45 (1G) Combo
  Managed Industrial Switch
 Standards - IEEE802.3, IEEE802.3u, IEEE802.3ab
- IEEE 802.3z 1000Base-LX/SX
- IEEE 802.3af PoE, IEEE 802.3at PoE+
- IEEE 802.3x Flow Control and Back Pressure
 Interfaces - 8 * 10/100Base-T PoE+ RJ45 connector
- 2 * 1000Base-LX/SX SFP/RJ45 Combo slots
 PoE Features - PoE Pin Assignment: 1/2(+) ; 3/6(-)
- PoE Port Output Voltage: 48 ~ 52VDC
- PoE Power per port (Average/Max): 15.4W/25W
- PoE Management: Supports PoE power settings on each port
- Supports PoE over-heat protection
- Supports power supply priority settings on PoE ports (supplies power to the high priority level port first when the power budget is insufficient)
- Scheduling of PoE operation and time
 Management & Maintenance - Web Management (HTTPS)
- SNMP V1/V2C/V3
- One-key recovery
- Login Record
- Reset button
 Protocols - 802.1Q VLAN, Port Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, POE+ management, ARP inspection, QoS, ACLs
 VLAN - Supports up to 4000 port-based VLANs simultaneously (out of 4096 VLAN IDs); IEEE802.1q
- Protocol-based VLAN;
- QinQ configuration
 Aggregation - Link Aggregation Control Protocol (LACP) IEEE 802.3ad;
- Manual aggregation
- Max 6 aggregation groups and max 8 ports per group
 Loop Avoidance Mechanism - Standard Spanning Tree 802.1d
- Rapid Spanning Tree (RSTP) 802.1w
- MSTP IEEE802.1s
 Multicast - IGMP Snooping v1/v2/v3, Max 64 multicast groups
- Fast log out
- MLD Snooping v1/v2
- Multicast VLAN
 QoS - Diff-Serv QoS
- 8*Output queues of each port
- 802.1p/DSCP priority mapping
- Queue Scheduling Algorithm (SP, WRR, SP+ WRR)
- Priority Mark/Remark
 ACLs - L3-L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range and VLAN etc.
 Security - Port Isolation
- Broadcast Storm Control
- Port-MAC Binding, IP-MAC-Port Binding
 DHCP - DHCP Relay
- DHCP Client
- DHCP Snooping
 Frame Size - Jumbo frames up to 9,6Kbytes
 Switching Capacity - 64Gbps (Non-blocking)
 Packet Buffer Memory Size - 4Mbit
 Forwarding mode - Store and forward
 Packet forwarding rate - 4.17Mbps @64byte
 MAC Address Management - MAC Address Table Size: 16K
- MAC address auto aging
- MAC address filtering
- Static MAC address
 Flow Control - Full Duplex: IEEE802.3x
- Half Duplex: back pressure.
 LED Indicators - Power indicator: PWR (green)
- Network indicator: Link/Act (yellow)
- Optical port indicator: F (green)
- POE operation indicator: PoE (green)
- Rate indicator: Speed (green)
 Power Supply Input - 48VDC (46~50V)
- Power Consumption (standby/full load): 6W/240W
- Overload Current Protection
- Reverse Polarity Protection
 Surge Protection - Anti-surge: 4KV 8/20us;
 EMS - IEC61000-4-2 (ESD):±8kV contact discharge,±15kV air discharge
- IEC61000-4-3 (RS):10V/m(80~1000MHz)
- IEC61000-4-4 (EFT): power cable:±4kV; data cable:±2kV
- IEC61000-4-5 (Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
- IEC61000-4-6 (radio frequency transmission):10V(150kHz~80MHz)
- IEC61000-4-8 (power frequency magnetic field):100A/m;1000A/m ,1s to 3s
- IEC61000-4-9 (pulsed magnet field):1000A/m
- IEC61000-4-10 (damped oscillation):30A/m 1MHz
- IEC61000-4-12/18 (shockwave):CM 2.5kV,DM 1kV
- IEC61000-4-16 (common-mode transmission):30V; 300V,1s
 EMI - FCC Part 15 / CISPR22 (EN55022): Class A
 Industry - IEC61000-6-2 (Common Industrial Standard)
 Mechanical standards - IEC60068-2-6 (Anti-Vibration)
- IEC60068-2-27 (Shock resistance)
- IEC60068-2-32 (Free falling)
 Environment - Operating Temperature: -40°C~85°C
- Storage Temperature: -40°C~85°C
- Storage Humidity: 5%~95% RH, Non-condensing
 Physical  Dimensions - 54 x 147 x 165mm
 Shell - IP40, Aluminium Alloy
 Installation - DIN-Rail
 Weight - 1.7Kg