Home > Products > Industrial Ethernet Switches > CLR-IES-L220
           
  CLR-IES-L220
  CLR-IES-L220
   
  20 Ports L2+ Full Gigabit Industrial Ethernet Switch
  16 * 10/100/1000Base-TX + 4 * SFP (1G)
  Din-Rail, Managed, Ring
   
 
              
             
  Specifications  
             
 
  Software Features
 Loop Avoidance Protocols - EAPS
- Ring. Recovery time <20 ms.
- STP/RSTP/MSTP
 Multicast - IGMP snooping/ IGMP v1/v2/v3
- GMRP
- Static multicast
 Management and Maintenance - CLI and Web management
- SNMPv1/v2c
- Unified PC software management
Standards - IEEE802.3-10BaseT
- IEEE802.3u 100BaseTX/100Base-FX
- IEEE802.3x Flow Control
- IEEE802.3z 1000BaseLX
- IEEE802.3ab 1000BaseTX
- IEEE802.1ab
- IEEE802.1D Spanning Tree Protocol
- IEEE802.1w Rapid Spanning Tree Protocol
- IEEE802.1Q VLAN Tagging
- IEEE802.1s Multiple Spanning Tree Protocol
- IEEE802.1p Class of Service
- IEEE802.1X Port Based Network Access Control
 
     
 
  Peformance Specs
 Priority queue - 8
 VLAN ID - 1-4096
 IGMP Groups - 512
 MAC address table - 16K
 Switching Bandwidth - 40Gbps
 Switching Delay - <5μs
 
     
 
  Interface Parameters
 Ports - 16*10/100/1000Base-TX ports and 4*SFP (1G) slots. Totally 20 ports
 Connectors - RJ45 for copper port, LC for SFP module
 Console port - Console interface is RS232 with RJ45 connector
 Power input - 5.08mm terminal block. Dual Power
 Alarm relay input - 5.08mm terminal block, 1A@24VDC
 LEDs (front panel) - Port light: LINK/ACT; SPEED
- Running light: RUN
- Power LED: PWR1; PWR2
- Alarm LED: ALARM
 
     
 
  Power Features
 Power input - Standard 24VDC dual redundant input
 Maximum Power Consumption - 15W
 Protection - Overload protection
- Reverse Polarity Protection
- Power input redundancy (hot-standby)
 
     
 
  Environmental Specs
 Operating Temperature - -40℃~70℃
 Storage temperature - -40℃~85℃
 Ambient Humidity - 5%~95% (non-condensing)
 Industrial protection level - IP40 protection, aluminium alloy shell
 Installation - 35mm din rail-mount
 Dimension - 150mm×128mm×72mm
 
     
 
  Industry Standards
 EMC - EN61000-4-2 (ESD), Level 4
- EN61000-4-3 (RS), Level 4
- EN61000-4-4 (EFT), Level 4
- EN61000-4-5 (Surge), Level 4
- EN61000-4-6 (CS), Level 4
- EN61000-4-8 Level 5
 Impact - IEC60068–2-27
 Fall - IEC60068-2-32
 Shock - IEC60068-2-6