| |
 |
|
|
|
|
|
| |
 |
| |
CLR-SWG-821P |
| |
|
| |
8*10/100M PoE +2*10/100/1000M + 1*SFP (1G) |
| |
Unmanaged PoE Switch Rack Mount |
| |
250m transmission distance at 10M rate |
| |
Total PoE power 100W |
| |
IEEE 802.3af & IEEE 802.3at |
|
|
|
| |
|
|
|
|
|
|
| |
Overview |
|
| |
|
|
| |
CLR-SWG-821P series PoE switches provide power and data to powered devices (PD) over Cat5/Cat6 twisted pair cables. They have eleven ethernet ports, eight of which has the ability to supply power. The next two ports are non-PoE gigabit ethernet ports which can be used as uplink, and the last port is an SFP slot which can accommodate 1G SFP modules. CLR-SWG-821P supports IEEE 802.3af and IEEE 802.3at standards up to 25.5W power per port. |
|
| |
|
|
|
|
|
|
| |
Advanced auto-sensing algorithm gives power only to IEEE802.3af/at end devices, so no need to worry about damaging non-PoE equipment. In addition, it cuts off the power when PoE devices are disconnected. |
|
| |
|
|
|
|
|
|
| |
Easy and reliable, CLR-SWG-821P series PoE switches automatically determine PoE requirements, speed, duplex type and cable type. They have LEDs on the front-panel that provide diagnostics of the whole system and help the operator to monitor the status of each individual port. |
|
| |
|
|
| |
Energy saving green design with automatic standby mode and cable length detection fuction. When there is no connetion on the PoE port, the port automatically goes to standby mode to save energy; If the cable is shorter than 10 meters it lowers the transmitted power. |
|
| |
|
|
| |
CLR-SWG-821P has fanless design which makes it work silently. It can be mounted on a wall with the help of mounting hardware or positioned on desktop. |
|
| |
|
|
|
|
|
|
| |
Application Diagram |
|
| |
|
|
| |
 |
|
