Home > Products > Voice Fiber Optic Multiplexers > CLR-FXS/O-161
           
  CLR-FXS-161
  CLR-FXS-161 & CLR-FXO-161
   
  16 Channels Telephone POTS + Ethernet over Fiber Optical Multiplexer
  FXO/FXS Set
  FC connector
 
              
             
  Specifications  
             
 
 Fiber Port - Multimode
 Fiber Type - 50/125um, 62.5/125um ; FC connector
 Maximum transmission distance - 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km) Wave Length: 820nm
 Transmitting power - -12dBm (Min) ~ -9dBm (Max)
 Receiver sensitivity - -28dBm (Min)
 Link budget - 16dBm
 
 Fiber Port - Singlemode
 Fiber Type - 9/125um ; FC connector
 Maximum transmission distance - 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)
 Wavelength - 1310nm
 Transmitting power - -9dBm (Min) ~ -8dBm (Max)
 Receiver sensitivity - -27dBm (Min)
 Link budget - 18dBm
 
 Ethernet Interface
 Connector Type - 1*RJ45, supports Auto-MDI-X
 Interface Rate - 10/100 Mbps, half/full duplex auto-negotiation
 Interface Standard - Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
 MAC Address Tabele Size - 4096
 
 FXS Phone Interface
 Connector Type - 16*RJ11, 2-3 is the pair which is used for telephone
 Ring Voltage - 75V
 Ring Frequency - 25Hz
 Two-line impedance - 600 Ohm (pick up)
 Return Loss - 40dB
 
 FXO Switch Interface
 Connector Type - 16*RJ11, 2-3 is the pair which is used for telephone
 Ring Detect voltage - 35V
 Ring Detection Frequency - 17Hz - 60Hz
 Two-line impedance - 600 Ohm (pick up)
 Return Loss - 40dB
 
 Environmental
 Power Supply - 12VDC 1A (external)
 Power Comsumption - ≤5W
 Dimensions - 45 X 180 X 300mm (H X W X L)
 Working Temperature - 0°C ~ 50°C