Home > Products > Device Severs > CLR-STE-W110
           
 
  CLR-STE-W110
   
  1x RS232 or 1x RS485 to Wi-Fi / Ethernet
  Device Server
  Industrial Serial to WiFi & Wired Ethernet Converter
  Gateway - Modbus TCP to Modbus RTU conversion
 
              
             
  Overview  
     
  CLR-STE-W110 is a device server that helps you remotely control automation systems which have serial interfaces (RS232 and RS485) on them. It also has ethernet interface which can either be used as wireless ethernet (wi-fi) or wired ethernet (RJ45) preferrably. The job is simply done by wifi to serial or LAN to serial conversion.

CLR-STE-W110 realizes transparent bi-directional transmission between RS232/RS485 and WIFI or ethernet interfaces. Transparent transmission means that whatever is transferred, this device plays the role of a channel and sends data to the target without modification.

Configuration can be made easily through web browser and its setup software. All the conversion work is done by the module.

It can be controlled by mobile phone or laptops, also can be connected to the remote server.
 
             
  Area of usage
PLC systems, sensors, meters, motors, drivers, barcode readers, displays, entry control systems, cantine machines, POS systems, building automation units, fire alarm systems, UPSs, energy control rooms, oil stations, automatic door systems.
 
             
             
  Topological Application Modes  
      1. Wireless Networking Modes  
          1.1. AP Mode  
          1.2. STA Mode  
          1.3. AP, STA Mode  
          1.4. AP+STA Mode  
     
      2. Wired Networking Modes  
          2.1. AP+LAN Mode  
          2.2. AP+WAN Mode  
          2.3. Routing Mode  
          2.4. Bridge Mode  
     
Application Diagrams
1.1. Wi-Fi Device Server as Access Point
 
1.2. Wi-Fi Device Server as STA
 
1.3. Wi-Fi Device Server as one AP and one STA together
 
1.4. Wi-Fi Device Server as AP and STA at the same time