| |
 |
|
|
|
|
|
| |
 |
| |
CLR-SWG-L214P |
| |
|
| |
8*10/100/1000Base-TX POE IEEE802.3af/at |
| |
2*10/100/1000Base-TX (non-POE) |
| |
4*SFP (1G) |
| |
Managed L2+ Switch |
|
|
|
| |
|
|
|
|
|
|
| |
Features |
|
| |
|
|
| |
- Fully compatible with IEEE802.3af/at (15.4W/25.5W) PoE standards on all eight ports Total PoE power is 130W |
|
| |
- 8 x RJ45 PoE+ 10/100/1000M + 2xRJ45 1G non-PoE ports and 4 x 1000Base-SX/LX SFP Slots |
|
| |
- Automatically detects the power needed by the PD device. Then supplies the appropriate power. |
|
| |
- Electric power is transmitted together with data on a single network cable. |
|
| |
- Managed via console (CLI), web GUI, SNMP |
|
| |
- Supports L2+ features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc. |
|
| |
- Supports spanning tree STP(802.1D) and RSTP(802.1W). |
|
| |
- Supports Jumbo frames up to 9.6Kbytes |
|
| |
- Supports cable diagnosis which means to adjust port signal power according to the cable length resulting to work efficiently |
|
| |
- Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode |
|
| |
- 8K entries MAC address table of the PoE Switch with auto-learning and auto-aging |
|
| |
- Ultra-low time-delay data transmission, completely transparent to the network protocol |
|
| |
- Up to 100m power transmitting distance over data cable. |
|
| |
- Internal built-in power supply |
|
| |
- LED indicators for monitoring power, link, activity and speed |
|
| |
- Plug-and-play, easy installation |
|
